Rifle Scopes

Shooting Targets

A.R.M.S. #32 Harris Bipod Adaptor – Throw Lever: MSP Scope Mounts
Precision and Tactical AR-15 Bipods: A.R.M.S. #32 Harris Bipod Adaptor – Throw Lever from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings.

Harris Bipod Model S-BRM 6″ to 9″ with Leg Notch Swivel Mount …
Precision and Tactical Harris Bipods: Harris Bipod Model S-BRM 6

Mossberg 500 Roadblocker: The most badass pump action shotgun ever …
If this does not keep hippies awake at night and zombies at bay I do not know what will. The Mossberg 500 Road Blocker a real badass. Pistol grip, heat shield

10/7/2011 10:36:20 AMHI Everyone,
I wanted to know your opinions on the LaRue Tactical LT-681 ACOG RCO Scope Mount vs. LaRue Tactical LT-100 Mount? I know the difference between them, but on a M4 type rifle, is one Scope Mount better than the other. I would be using this on my TA31F. What are your experiences?

Thanks for your time,

Kirk

This type of customer service speaks volumes about your company and your products. Thank you, Officer Kyle Schmidt Tempe Police Department Firearms Training Unit So comfortable you’ll forget your wearing hearing protection protection Hello, I purchased the Dimension Gold and I have been using them 8 to 10 hours every day for 3 weeks.

]
11/13/2008 8:21:36 PM EST
Just got my Eotech 512 on the advice of an ex marine.Told me both EOTech and aimpoint are good and has used both. He pointed out the differences and flaws in both and EOTech won out. Cant wait to take it out.
llamanator
11/13/2008 8:28:41 PM EST
I love my Eotech 512 on my stag. Though i will replace it with an acog ta01nsn sooner or later.

OhioShemanese
11/13/2008 8:32:10 PM EST
I have a Eotech 512 and 552, unless you will even uss NVGs Eotech 512 is a good option. I have even mounted my 552 on my AR-50 50BMG and it handled the recoil great. It will work fine out 200 meters.
redneckarmy34
11/13/2008 9:16:46 PM EST
I love my 512
Shop around and you should be able to get one under $350
cp9122
11/13/2008 11:13:10 PM EST

Different Ray Wilkins believes clashes over proposed transfer targets could have led to Neil Warnock’s exit from QPR. Warnock, 63, was axed from his post at Loftus Road on Sunday with the Hoops 17th in the Premier League table, having picked up no wins in … Burton Rotary donates funds for Geauga Park’s Nature BURTON [...]

Different
Ray Wilkins believes clashes over proposed transfer targets could have led to Neil Warnock’s exit from QPR. Warnock, 63, was axed from his post at Loftus Road on Sunday with the Hoops 17th in the Premier League table, having picked up no wins in …

Burton Rotary donates funds for Geauga Park’s Nature
BURTON – Some fifth-graders in Geauga received a gift from the Burton-Middlefield Rotary Club. The club donated $2,000 to Geauga Park District Foundation for the Nature

Kruger Unveils T4I Tactical Riflescope Collection
Visitors can try out the new

StealthyBlagga 7/18/2011 10:10:32 AM EST I played with a friend’s 712 Utility. It is surprisingly light in the hand, comparable to a Benelli. As would be expected, it shoots softer than a Benelli. My friend had added a DMW Carrier Release Bar from a Benelli and it fit/functioned just fine. The gun cycled everything I [...]

StealthyBlagga 7/18/2011 10:10:32 AM EST
I played with a friend’s 712 Utility. It is surprisingly light in the hand, comparable to a Benelli. As would be expected, it shoots softer than a Benelli. My friend had added a DMW Carrier Release Bar from a Benelli and it fit/functioned just fine. The gun cycled everything I fed it with 100% reliability. I don’t know how much ammo he has put through it by now, nor how it will hold up long-term, but it looked pretty well made to me. For $400, the CZ route is likely to be a lot more economical. The only potential downside would be if you wanted to add a pistol grip stock… presumable 922r would come into play. If you want a pistol grip stock, the Mossberg 500 Accessories is not a good choice either due to the location of the safety.
Neomonk21
7/18/2011 10:43:55 AM EST
I toyed with the idea of a pistol grip stock but don’t know if it is for me or not. I have never shot one before but like the idea of them. I might eventually get one for my 870 just to try it out.
StealthyBlagga 7/18/2011 12:13:02 PM EST
Originally Posted By Neomonk21:
I toyed with the idea of a pistol grip stock but don’t know if it is for me or not. I have never shot one before but like the idea of them. I might eventually get one for my 870 just to try it out.

I like them myself, but the majority opinion in the 3-gun world is that a traditional stock works better for most. If you really want a pistol grip, I would look at the Remington 11-87 (what I run, used examples are plentiful around $400, require careful maintenance to keep running) and slap on a Choate stock, or consider the FN-SLP Tactical ($1100 new) if you can stand the butt-ugly stock design:

echofivekilo
7/18/2011 1:03:47 PM EST
I bought a 28″ bbl 930 and had it cut to 24″ and threaded. There’s a thread about the 930 somewhere in here – a few of us have them.
I absolutely love mine.

AR-15 Stock – I said to myself. Interesting. I never knew that. But I have never seen an ACOG on a carry handle with two screws, just the one. Its not the guy that walks in with a gun and says he is going to start shooting that you have to worry about. Its [...] [...]

AR-15 Stock – I said to myself. Interesting. I never knew that. But I have never seen an ACOG on a carry handle with two screws, just the one. Its not the guy that walks in with a gun and says he is going to start shooting that you have to worry about. Its [...]

9000sc aimpoint – Nope. Heavy as hell, prices now close to HK91 prices. Achilles1 7/31/2007 10:28:13 PM Your gonna hear shit about M1A’s QC in the layered internet babble that the internet is great for that’s more echoing someone elses problem rifle by guys that don’t know shit about them and didn’t own the rifle [...]

Duh! Do not pray for easier life’s, pray to be stronger men. – JFK User Info IM User Email User Reply Quote Report benw8887 Bronze Contributor Joined: Dec 2009 NM, Severed heads equal open minds! Offline Posts: 742 Link To [...]

But you have to be aware of all the sound in your life, explained Andrew Vermiglio, an audiologist with the House Research Institute, a nonprofit organization that studies and promotes hearing protection safety. “It’s not just MP3 players. Sitting on a lawn mower or a noisy train. Going to a concert. All of these things [...]

512 eotech – hk940 12/20/2007 4:43:10 PM Originally Posted By Mike_Mills: Conventional Wisdom: The M1A Accessories is difficult and expensive to make super-accurate. The M1A Accessories is difficult and expensive to maintain as a super-accurate rifle. At 800 yards, the skill of the shooter to dope the wind far outweighs the inherent accuracy of [...]

aimpoint ml2 – Mounting Solutions Plus (MSP) – Guns Plus, Firearm Shooting …MSP is both a manufacturer of high quality firearm accessories and a distributor of respected firearms accessories and related products. We make and distribute … AR-15 Stock “But the new Admin. is a Master in IDPA” “MASTER in IDPA…” “is like C Class [...]

AR-15 Stock – eotech magnifier – Maybe I’m just not looking in the right spots. Lots of guys have Aimpoints and they seem to be a quality product. I’m putting together a carbine for home defense (Del-Ton 16″ kit) Maybe a little varmint hunting in the future. I plan to add a 3x magnifier [...]

Bronze Contributor Joined: Jul 2007 WA, bla bla bla Posts: 2889 Link To This Post Blog User Blog Media Media Collections EE Feedback 100% (130) Posted: 10/23/2011 6:23:36 PM EST [Last Edit: 10/23/2011 6:24:21 PM EST by monstercat79] never seen one. as far as [...]

512 eotech – Had batteries leak inside it and caused problems. EOTech replaced the battery box, and I got rid of the sight. Customer service was very friendly and helpful. http://img61.imageshack.us/img61/2835/dsci0030co6.jpg On a sidenote, if you want a good absolute co-witness QD mount, the GG&G lever as shown works great. The LaRue Tactical riser [...]

Bronze Contributor

Joined: Jul 2007
WA,
bla bla bla

Posts: 2889
Link To This Post
Blog User Blog
Media Media Collections
EE Feedback 100% (130)
Posted: 10/23/2011 6:23:36 PM EST
[Last Edit: 10/23/2011 6:24:21 PM EST by monstercat79]
never seen one. as far as I know there is no factory threaded barrels.
User Info
IM User
Email User
Reply
Quote
Report
B44T

Joined: Jun 2006
WA,
Offline
Posts: 2773
Link To This Post
EE Feedback 100% (11)
Posted: 10/23/2011 10:02:13 PM EST
There were but not many compared to the number of pressed and pinned guns.
User Info
IM User
Email User
Reply
Quote
Report
EAB1911

Joined: Jul 2004
GA,
Offline
Posts: 728
Link To This Post
EE Feedback 100% (38)
Posted: 10/25/2011 2:41:57 PM EST
Go to www.sksboards.com and start posting, and looking there. You can also post a WTB ad, but you may have to make a small donation to the site. That sorta makes you a of the site and lets you see the all of the classifieds and post in the classifieds as well.
Was at a local shop and saw a Glnic imports SKS Rifle Stocks marked “CGA made in China” . It is in excellent condition, all matching, machined trigger group, screw in barrel, and spike bayo. They want $295.00. Never heard of this importer or manufacturer. Is this a good gun?
User Info
IM User
Email User
Reply
Quote
Report
DanTSX
Bronze Contributor

Joined: Oct 2008
CT,
on a Rhodetrip

Posts: 11247

Collide-O-
The Collide-O-

Aimpoint comp m2

Aimpoint comp m2

Shooting Targets !

Shooting Targets

!

Mossberg 500 Accessories elcan specterdr

Mossberg 500 Accessories
elcan specterdr

Shooting Targets

4/2/2009 9:02:03 PM I have two….(I got mine from VTac though)…one on my duty AR and one on my Personal AR. I love them….comfortable….versital….and easy to use. I like being able to tighten it up especially if I need to close distance with a suspect to cuff him….it keeps the AR tight in and more [...]

4/2/2009 9:02:03 PM
I have two….(I got mine from VTac though)…one on my duty AR and one on my Personal AR. I love them….comfortable….versital….and easy to use. I like being able to tighten it up especially if I need to close distance with a suspect to cuff him….it keeps the AR tight in and more controlable.
sleepdr
4/4/2009 2:12:15 PM
Another +1(West Bridgewater, MA) – The matter of Atlantic Research Marketing Systems, Inc. v Austin Precision Products, Inc. d/b/a LaRue Tactical, United States District Court for the District of Massachusetts, Civil Action No. 1:09-cv-10034(DPW), was settled and dismissed with prejudice. LaRue Tactical has taken a fully paid up, royalty free license under U.S. Trademark Registration Nos. 3,466,163 and 3,478,909.

eotech xps3 but if I had to pick between your options, I would pick the M1A. just dont care for the PTR’s much. GLOCKCRAZZ 8/1/2007 1:32:49 PM In order and yes I have and have shot all of them. FAL (DSA) M1A Scope Mounts (SA NM) PTR-91 (JLD) SilentType 8/1/2007 1:44:52 PM MajorCaliber: I would [...]

eotech xps3

but if I had to pick between your options, I would pick the M1A. just dont care for the PTR’s much. GLOCKCRAZZ

8/1/2007 1:32:49 PM In order and yes I have and have shot all of them. FAL (DSA) M1A Scope Mounts (SA NM) PTR-91 (JLD) SilentType

8/1/2007 1:44:52 PM MajorCaliber: I would buy a FAL, and never look back!

Mesa_Tactical 9/7/2007 10:11:26 AM Originally Posted By clasky: Mesa, is there anyway you can check on this? If you can confirm that the SureShell will clear the rear sight, I will be ordering one. We’ve never seen an 870P MAX, so we don’t know where the sight is. If you can measure how far the [...]

Mesa_Tactical 9/7/2007 10:11:26 AM Originally Posted By clasky: Mesa, is there anyway you can check on this? If you can confirm that the SureShell will clear the rear sight, I will be ordering one. We’ve never seen an 870P MAX, so we don’t know where the sight is. If you can measure how far the [...]

Mesa_Tactical 9/7/2007 10:11:26 AM Originally Posted By clasky: Mesa, is there anyway you can check on this? If you can confirm that the SureShell will clear the rear sight, I will be ordering one. We’ve never seen an 870P MAX, so we don’t know where the sight is. If you can measure how far the [...]

eotech 3x –

eotech 3x –

AR-15 Stock –

Mossberg 500 Accessories – Aimpoint Comp M2 – MSP: AR-15 Accessories, Scope Mounts & Rings, Rifle Scopes …AR-15 Accessories, Scope Rings & Scope Mount from Mounting Solutions Plus a manufacturer of high quality tactical firearm accessories and a distributor of respected … aimpoint 3x – Remington 870 Accessories I have a YHM angle mount, I’ll [...]

During that time, the round charging handle has served me well-right up to my first tactical shotgun training course a few weeks ago. During the course I did a lot of off-hand charging and round switching. I found myself wishing the handle was a bit bigger, which would have made grabbing it with my support [...]

! –

Posted Via AR15.Com Mobile Mccray6/17/2011 2:08:29 AM I have run the gambit fromEotech516 to Burris XTR 1-4X ,then to an aimpoint CompM2, then back to an Eotech, Then a TA31H 4X ACOG. Just recently I sold the Trijicon ACOG and purchased anEotechEXPS.The” Doughnut Of Death” reticle and overall FOV Always pulls me back. For me it has always been the fastest reticle to aquire and center on a target from 0-200 +yards pretty easily and range estimating with the ghost ring is quick and easy to an extent. I like the super brightness, the brightest red dot of the 3, settings and that they are better , stronger ,lighter and more compact now.IMO The Trijicon ACOG was impractical for Close range situations and I decided no to go with the added weight of a secondary 1x micro. I also find it easy to lose sight of a red dot through a tube type sight for critical seconds durring snap shots, whereas theEotechseems to lock your eyes into the target I have never tried a Trijicon Reflex or Mepro. I would be interested to see how well they workSo… I’m building an AR for duty, home defense, predator hunting, and plinking. I know it’s varied uses but it will be the only AR I personally own and until I build more this going to have to do it all. Anyway, I’m park ranger so most of action will be outdoors and I’m looking for a good scope to go on it. I’ve settled on either the Trijicon Trijicon AccuPoint 1x-4x or the Burris XTR 1x-4x, they’re both similar in price and features I was just wondering if anyone had any faults with either or knew of any reason why one is so much better than the other. I was leaning toward the Burris as I have their scopes on two of my bolt rifles and love them, though I do find it nice the Trijicon takes no batterys.

Golf Channel kicks off 2012 PGA Tour television coverage with Hyundai Tournament of Champions

US Military Adds Heavy Trucks Under FHTV-III
The system must acquire, track, and select an

How kind to chime in. paltik 4/11/2005 4:15:22 AM Tasco PropointS are made in the PHILIPPINES techbrute 4/11/2005 11:28:59 AM Cyclic240B What I’m looking for is an affordable (under $40) switch I can mount on the rail that works with this light. I just don’t want to spend more on the switch than I did [...]

How kind to chime in. paltik 4/11/2005 4:15:22 AM Tasco PropointS are made in the PHILIPPINES techbrute 4/11/2005 11:28:59 AM Cyclic240B What I’m looking for is an affordable (under $40) switch I can mount on the rail that works with this light. I just don’t want to spend more on the switch than I did on the $60 flashlight. ETA: this TacStar switch works with the Surefire G2, but I don’t know if that means LED or incandescent, or if that even matters as long as the actual cap size is the same. TacStar switch at PA Cpatterson 7/24/2011 5:09:23 AM it will work with the LED bud7h7 7/24/2011 5:36:12 PM Excellent, thanks a lot Loe_307 8/11/2011 7:10:56 AM I’ve been thinking about getting that same switch. Did you get one? If so how well made is it? RNO 8/11/2011 8:01:07 PM I like this tape switch better, based on what you’re getting and the price. Is it a quality piece? IDK. YET! ordered one with a 18650 host It has to be as good as the Tac Solarforce PTS-3 Loe_307 8/12/2011 4:10:21 AM RNO:

Nikon Scopes

Shooting Targets I learned my electronic ears were still under warranty. Pro Ears provided me with the shipping information and an RMA number. As the conversation with your staff continued, they discovered that we have several pair of hearing protection protection that were no longer working properly. Ultimately, I was told to ship all four [...]

Shooting Targets

I learned my electronic ears were still under warranty. Pro Ears provided me with the shipping information and an RMA number. As the conversation with your staff continued, they discovered that we have several pair of hearing protection protection that were no longer working properly. Ultimately, I was told to ship all four pair of Pro Ears back to them for diagnosis. I was told they would check them out and would contact me to let me know if they could be repaired and how much the repairs would be. Last week I received a package with four pair of Pro Ears. Two of which had been repaired. The other two pair of electronic ears had been replaced.

!

HARRIS BIPODS IDENTIFIER – MSP: AR-15 Accessories, Scope Mounts …
To Use this Identifier to Select Your Bipod: Note: Bench Rest Items are marked with “*” in Harris Column 2.

scope rings – eotech 3x – EOTech magnifier It looks like a Magpul? worth it… I looking at adding a AR10-A$ or a SOCOM to my collection. I have a National Match M1A Scope Mounts and a AR10. Anyone have both or shot both enough that they have an opinion on this? worth it… I [...]

scope rings –

eotech 3x – EOTech magnifier

It looks like a Magpul? worth it… I looking at adding a AR10-A$ or a SOCOM to my collection. I have a National Match M1A Scope Mounts and a AR10. Anyone have both or shot both enough that they have an opinion on this? worth it… I looking at adding a AR10-A$ or a SOCOM [...]

It looks like a Magpul?

worth it… I looking at adding a AR10-A$ or a SOCOM to my collection. I have a National Match M1A Scope Mounts and a AR10. Anyone have both or shot both enough that they have an opinion on this? worth it… I looking at adding a AR10-A$ or a SOCOM to my collection. I have [...]

It was scooting allover the place until we would loose sight of it because of the snow then we would pick it and start over again. the above counts are a extimate but i think its pretty close. I’ll have to take one to the next browns camp shoot and let everyone open fire [...]

MOUNT-N-SLOT [Industry Partner] 7/26/2010 7:01:01 PM Hi The SOCOM is short barreled and more of a door kicker gun; the AR10 is more a precision long range gun. Not necessarily…the A4 with a 16″ barrel and Aimpoint make for quite a doorkicker… LARRYG 3/20/2007 1:33:12 AM bjwar10: BB: ma707: I looking at adding a AR10-A$ [...]

Shooting Targets

2/4/2011 8:39:46 PM
boricua9mm:
If you want to tuck a BUIS under the ACOG, then go with the LT100. If not, the RCO Scope Mount is a good choice.

Na you can use a BUIS with the RCO mount. I run it with my NSN/DOC and a Troy with no problems. Either Scope Mount will be good. I went with the RCO for cosmetic reasons, not to mention its a little cheaper.
flpickupman
2/4/2011 10:07:38 PM
boricua9mm:
If you want to tuck a BUIS under the ACOG, then go with the LT100. If not, the RCO Scope Mount is a good choice.

My BUIS is mounted (since the photo was taken) at the back end of the railed handguard. To be replaced with a T-1 hopefully in the near future. The arrangement is sufficient.

Trenchknife
2/5/2011 3:47:57 PMQustion to other ARFCOM members, is anybody using the LaRue Tactical offset SureFire light mount? I am looking at either LaRue Tactical or Yankee Hill offset angle ligt Scope Mount to lower my light just a bit lower. I am currently using a Tango Down vertical grip in conjuction with a SF 951 6 volt light.
If anyone got any good pics to show I would appreciate it. TIA…556fmj
edwin907

A.R.M.S. #32 Harris Bipod Adaptor – Throw Lever: MSP Scope Mounts
Precision and Tactical AR-15 Bipods: A.R.M.S. #32 Harris Bipod Adaptor – Throw Lever from MSP – Mounting Solutions Plus Firearm Accessories and Scope Mounts & Rings.

Thank you for everyones advice and help.

I think I finally have all my information pulled together and plan on pulling the proverbial trigger and purchasing my LaRue Tactical this weekend/next week.

Thank you again!

I haven’t seen the stock on an SKS Rifle Stocks personally except in pictures.
Before cleaning.

The first patch I ran through, and the last one. Some krud Kutter for the stock. A little TLC stuff for the commie lady!

And when I was done with her. Not much difference, but much cleaner! Don’t worry my friend, now your have a proper home. Another American Patriot with a commie tool!

Posts: 22
Link To This Post
EE Feedback 0% (0)
Posted: 10/31/2011 4:00:58 PM EST
I have a Tula, 59/66 and a Polytec. never had a problem out of any. but, then again I clean mine

And just about every 3-gunner using an Benelli M2 Accessories Field (which is a lot). You’ll recall that near the end of this season’s "Top Shot" they were using a Salient Arms International Benelli M2 Accessories with a nice, long mag extension. I don’t re reading about or seeing ATF kicking down anyone’s doors for that… MDracer76 5/4/2011 11:04:23 PM Originally Posted By leid: MDracer76, Thanks for the actual LOP measurement. That LOP is pretty short unless you are wearing a lot of outer clothing/body armor. To get an idea of drop on your Urbino stock: When you mount your Benelli M2 Accessories with Urbino stock & cheek riser normally but quickly, are you looking thru the sights or over them? Also, how did the Urbino fit your Benelli M2 Accessories especially in the trigger area? IIRC, the Urbino for the M4 was tight in the trigger area.

Will LaRue Tactical mounts fit on Daniel Defense rails?

I’m just a range schmuck, but one who has been known to drop stuff at inopportune times. (Ever drop a wah-wah pedal on a guitar? I have!) I’ve read the SPOT red dot torture test thread and I was impressed. How would an Eotech hold up to such shenanigans? What about the CompC3? If it matters, it’ll be going on a Stag 3. I am not interested in hearing about battery life, ease of operation, reticles, or mount options. I’ll save those for another time. Zack3g [Life Member] 5/11/2008

Yep

Posted Via AR15.Com Mobile
gearjammer351
8/4/2011 4:46:08 PM
patriot73:Hello All, Fast question here … Will the LaRue Tactical Pivot Scope Mount fit the Burris 3x Magnifier??? Thanks In Advance, Take Good Care, and Be Safe Always,

-RAVENEDGE-
socommatthews
9/19/2009 8:48:16 PM
Taggin cause I plan to get one. I looks like it will but I dont know for fact.
gunmetalgray [Member]
9/19/2009 8:49:24 PM
Looks like their both 30 mm

http://www.burrisoptics.com/artripler.html

seamasterpro 2/2/2011 11:56:18 PM I tossed the two around before I bought and ended up with the LT-681 on my A4gery and glad I did. because of the short eye relief of the TA31 I mounted mine really far back, farther than I could have gone with the LT-100. the LT-681 mounts extremely solid so all things being relatively equal I figure you might as well get the one you can Scope Mount furthest rearward and equally as far forward. flpickupman 2/4/2011 7:01:24 PM The RCO Scope Mount is going to give you worlds more adjustment for eye relief. Mine has been more than solid. No complaints. boricua9mm [Member] 2/4/2011 7:30:45 PM If you want to tuck a BUIS under the ACOG, then go with the LT100. If not, the RCO Scope Mount is a good choice. socommatthews (West Bridgewater, MA) – The matter of Atlantic Research Marketing Systems, Inc. v Austin Precision Products, Inc. d/b/a LaRue Tactical, United States District Court for the District of Massachusetts, Civil Action No. 1:09-cv-10034(DPW), was settled and dismissed with prejudice. LaRue Tactical has taken a fully paid up, royalty free license under U.S. Trademark Registration Nos. 3,466,163 and 3,478,909.
http://nebraskafirearms.org/forum/index.php/topic,3466.msg25761.html#msg25761

Now that it’s broken in it runs flawlessly. I had some rust form on the mag tube under the handguard which was affecting cycling. I cleaned it up with some emory cloth, reblued it, and oiled the heck out of it. Runs like a champ now. It’s very soft shooting and fast, too.
Does anyone know of a Mossberg 500 Accessories 500 single-point sling adapter plate for use with the HK hook?

I’m sure the rectangular type would work with the hook, but then I may as well just buy a new sling system. The rectangular loop would allow the hook to slide back and forth a little too much.

I’m trying to make my HK-hook sling compatible with several of my platforms.
Mesa Tactical _Tactical 10/25/2004 7:53:54 PM EST
Originally Posted By thepappymancan:

Shooting Targets